Cách chọn máy ép lọc theo công suất xử lý

For example, a wastewater treatment plant is designed to treat a total of 1,000 tons of wastewater, with a solids content of 1% (an important parameter), and is scheduled to work 8 hours a day, and the nature of the wastewater is municipal wastewater. How to choose a filter press?

  1. Calculate how much absolute dry sludge (sludge without water) there is in a day, the formula: total amount of sewage x 1% solids content = absolute dry sludge (1000 tons x 1% = 10 tons).
  2. The water content of municipal sludge treated by filter press is about 75%, and then calculate the amount of sludge with water content of 75%. The amount of absolute dry sludge × 1.75 = sludge with 75% water content (10 tons × 1.75 = 17.5 tons), resulting in 17.5 tons of sludge with 75% water content per day.
  1. Assume that it works eight hours a day. The total amount of sludge with 75% water content ÷ 8 hours = the amount of sludge with 75% water content to be treated per hour (17.5 tons ÷ 8 = 2.1875 tons), which requires about 2.2 tons of sludge to be treated per hour. The cycle of a filter press to treat municipal wastewater is usually once every 4 Giờ, and a single treatment volume of a machine is 4 × 2.2 tons = 8.8 tons.
  2. Then divide by the planned use of several filter presses, here we choose only one filter press, which is 8.8 tons ÷ 1 to get the need for a single filter press capable of processing 8.8 tons of sludge. The volume of one square of filter press is 15L, so 8.8 tons ÷ 15L, which gives us a filter press with an area of about 586 square meters. Multiply by 1.2 times. Thus, a 700-square-foot filter press basically meets the production needs.

 

Chia sẻ mục này
Chia sẻ trên trang chủ
Chia sẻ trên Twitter
Chia sẻ trên liên kết
Chia sẻ trên Pinterest
Chia sẻ trên VK
Chia sẻ trên Email

Để lại một bình luận

Email của bạn sẽ không được hiển thị công khai.